Used formwork of various manufacturers and brands in tested quality

The term “used formwork” refers to formwork systems that have already been used on building construction and civil engineering projects to hold liquid concrete in place until it has cured. It covers wall and slab formwork, props, formwork beams and accessories. Before they are sold, used formwork panels are professionally cleaned, technically inspected and fully reconditioned as required.
XFORM provides only quality-controlled, ready-to-use formwork systems

Purchasing used formwork offers obvious benefits:

• Cost-effectiveness
• Sustainability
• Availability
• At XFORM: certified quality

As used formwork is considerably cheaper than new formwork, cost savings are the key consideration for many prospective buyers. Sustainability also plays an important role: given its long service life and reutilisation, used formwork helps to conserve resources and reduce the carbon footprint.

As a wholly owned subsidiary of formwork manufacturer MEVA, XFORM offers only MEVA-quality systems that have been certified to the manufacturer’s specifications. Many products can be promptly delivered and are thus available at short notice.

At XFORM and other used formwork dealers, you will find the products of such leading brands as:

• MEVA
• Doka
• Peri
• Hünnebeck
• Ringer

Ranking among the world’s top providers in the concrete construction sector, these manufacturers excel by the high quality, durability and compatibility of their systems. Even their used formwork may be considered products of choice for building projects.

Used formwork is often put on sale by specialist dealers and platforms. To obtain high-grade used formwork, it is worthwhile looking for qualified dealers, e.g. the subsidiaries of distinguished formwork manufacturers.

These include:

• XFORM (MEVA subsidiary), certified MEVA formwork systems as well as used formwork of other manufacturers
• Formon (Doka subsidiary)
• Schaltec (PERI Group)
• LUKIC Schalungstechnik
• Online marketplaces such as Machinerypark and baupool
• RINGER, e.g. used Alu Master formwork

XFORM offers customers all the benefits of direct manufacturer quality built on MEVA expertise. XFORM sells not only used formwork systems made by the parent company, but also specially tested systems of other manufacturers.

The wide variety of used formwork products on offer covers all key formwork systems used for concrete construction, including:

• Wall and slab formwork
• Steel and slab props
• H20 formwork beams
• Formwork facings and table forms
• Shoring tower systems
• Tensioning and connecting materials
• Push-pull props and accessories

In addition, XFORM regularly offers special one-off items and original MEVA systems.

Formwork serves as a temporary mould that holds fresh (liquid) concrete until it has fully cured. The formwork thus lends the concrete the required geometric shape, which it will then independently retain after curing. The formwork system is finally stripped, i.e. removed, to leave the finished concrete element in place.

Formwork must:

• accommodate considerable horizontal and vertical loads,
• remain dimensionally stable,
• be accurately positioned and aligned.

The overall concrete formwork system comprises the formwork panel with form face and props. These must be mutually compatible.

The condition of used formwork varies as it reflects the often wide-ranging quality of the material purchased by specialist dealers. Some of these, like XFORM, recondition the used formwork and classify it according to a transparent grading system.

Depending on the dealer, used formwork is available in various grades, e.g.:

• Cleaned
• Checked
• Partly or fully reconditioned
• Ready-to-use with signs of wear
• Classified according to quality grades

As a MEVA subsidiary, XFORM offers used formwork in verified quality certified to in-house and established market standards.

The quality of frame and facing is crucial for performance and concrete quality. Check the frames for deformation, watertight joints and facing quality. Materials such as steel or aluminium have a proven track record and vouch for a long service life.

Any assessment of used formwork should focus on the following characteristics:

• Condition of frames, profiles and facing
• Serviceability of connecting components
• Compatibility between different manufacturer systems
• Completeness of all required modules

Transparent and meaningful classifications of the available quality also help buyers to make the right choice. Here, XFORM applies an easy-to-understand, five-level grading system that meets the GSV (Concrete Formwork Quality Protection Association) quality criteria for rental and used formwork.

To ensure compliance of the used formwork with all necessary criteria and its later suitability for use, a prior on-the-spot inspection is recommended. XFORM offers fixed appointments with in-depth counselling for this purpose.

Yes. Used formwork can and should normally be viewed prior to purchase. Reputable dealers and providers of used formwork will allow you to inspect the formwork by appointment. Inspections are particularly advisable in case of bulk purchase. XFORM will give you the opportunity to do this at its warehouse in Haiterbach.

As an alternative to on-the-spot inspections, XFORM usually provides extensive image material that enables more remotely located customers to scrutinise the goods prior to purchase. Nonetheless, an on-the-spot inspection is always preferable.

Yes. XFORM will purchase formwork systems produced by various manufacturers – regardless of condition.
These are assessed on the basis of:

• Brand
• Condition
• Quantity
• System compatibility

XFORM will offer a fair purchase price and fast processing. 

Yes. As a wholly owned subsidiary of the distinguished manufacturer MEVA, XFORM excels by its profound consulting expertise, offering:

Technical counselling

• Telephone and written advice
• Support in selection of compatible systems
• Assessment of economic service life

XFORM supports customers with regard to specific application issues and individual quality upgrades to bring about the best possible purchasing decision.

Sound advice above all ensures the suitability of the used formwork for its subsequent applications. XFORM customers are thus able to capitalise on in-depth manufacturer know-how and long years of industry experience.

Apart from used formwork, such dealers frequently offer the following additional products:

• Scaffolding systems
• Standard and load-bearing frame props
• Timber beams and formwork panels
• Site fencing/hoardings
• Construction plant and equipment
• Clearance stock & special batches

XFORM focuses on high-grade MEVA formwork systems and tested used products of other established manufacturers. The actual offerings depend on current developments and availability.